Discus Guide

How to Choose a Discus

Walk into a throws shed and you’ll see a pile of discs that all look about the same. They aren’t. Two discs of the same weight can fly very differently, and the wrong one can hold a thrower back for a whole season.

Choosing a discus comes down to four questions: what weight you need, how much rim weight suits your throw, what it’s made of, and what you want to spend. Here’s how to answer each one.

Step 1: Get the Weight Right

Weight isn’t a choice. The rules for your level set it. In short:

  • High school (NFHS): boys 1.6 kg, girls 1 kg
  • College and open: men 2 kg, women 1 kg
  • Middle school: varies by state, often 1 kg for boys and 0.75 kg or 1 kg for girls
  • USATF youth and masters: set by age group

For the full table with sources, read Discus Weights by Age and Level.

Buy at least one discus in your competition weight. Many throwers add a lighter or heavier disc for training once they have the basics down.

Step 2: Choose a Rim Weight

Rim weight is the share of the discus’s weight that sits in the rim. It’s the biggest difference between one disc and the next, and it’s the choice most throwers get wrong.

  • Low rim weight (around 70-75%): spins up easily and settles into flight quickly. It’s forgiving of an imperfect release. Best for beginners, developing throwers and warm-ups.
  • Medium rim weight (around 78-80%): a step up in carry for throwers with a more consistent release.
  • High rim weight (above 80%): holds its spin longer and can carry farther, but only if you release it with real speed and a clean spin. Without that, it wobbles and drops.

More rim weight doesn’t automatically mean more distance. It means the disc needs more from you. We go deep on the physics, and on how to tell which one fits your release, in High Spin vs Low Spin Discus.

A simple rule: if your throws wobble or flutter, go lower. If your release is clean and the disc comes off fast, you’re ready to try higher.

Step 3: Pick the Material

Discs are made from several materials. Each has a place.

Material What it’s like Best for
Rubber Tough, handles hard surfaces and wet days Beginners, indoor and practice
Wood Traditional plates with a metal rim Entry-level throwing
Plastic Durable, low cost Practice and young throwers
Metal rim (aluminum or other plates) Precise weight placement, sets the rim weight Competition at every level
Carbon plates Light, stiff plates that push weight to the rim High rim weight competition discs

For competition, most throwers use a metal-rim discus, because the maker can place the weight precisely and control the rim weight. That precision is what makes a disc fly the same way throw after throw.

Every FiberSport discus is a metal-rim competition disc. The ORBIT-I, ORBIT-II and ORBIT-IV use CNC-machined aluminum plates, and the FSPRO discs use black anodized or platinum-plated aluminum. We don’t currently list a carbon-plate discus. If that’s what you’re after, ask us.

Step 4: Set a Budget

Discus prices spread widely. Basic rubber and practice discs cost the least. Precision metal-rim competition discs cost more, and the highest rim weight models cost the most.

A smart way to spend:

  • Beginners: one forgiving, low rim weight disc in competition weight.
  • Developing throwers: add a medium rim weight disc as your release gets consistent.
  • Advanced throwers: add a high rim weight disc for meets, and keep the lower one for warm-ups and windy days.

Owning two or three rim weights is common among serious throwers, and it lets you match the disc to the day.

Why Cheap Discs Cost More Later

A cheap or unbalanced discus doesn’t just fly shorter. It builds bad habits. Timing in the ring depends on the disc reacting the same way every throw, and switching between uneven discs keeps throwing that timing off.

When we tested other brands, we found carbon plates woven with uneven strands that left the disc out of balance, nylon plates that varied in rim weight within the same model, and colored plastic plates with fillers that weaken them. That’s why FiberSport plates are golden yellow ABS composite: the color needs no filler.

How We Test and Build FiberSport Discus

  • Wind tunnel testing. We tested each design in a wind tunnel and added wind to the rim weight equation, so every FiberSport discus carries a distance rating that makes picking one easier.
  • Rim control. Older designs put the weight too far out on the rim, so the disc tipped as its spin died. Balancing the plate and rim fixed that: with less tip, the discus glides up to 12 ft (3.5 m) farther.
  • In-flight data. Chips inside test discs measured gravity, gyro spin, tip stability and distance. The data showed why it pays to bring two or three rim weights to a meet: wind, rim weight and your distance together decide which disc flies best that day.
  • Machined Pro plates. The FSPRO discs use CNC-machined aluminum plates with a true center hub instead of glued, hand-balanced parts. Damaged plates can be replaced with precision-fit parts, so the disc keeps performing the same.

Matching FiberSport Discus to Your Level

Here’s how the FiberSport range lines up, using the rim weight, weights and target throw range from each product.

Model Rim weight Weights Built for throwers at List price
ORBIT 73%, steel rim 1, 1.6 kg 30-40 m (100-133 ft) $140-150
ORBIT-I 75%, low spin 1, 1.5, 1.6, 1.75, 2 kg 40-45 m (133-150 ft) $160-195
ORBIT-II 78%, low-to-mid spin 1, 1.5, 1.6, 2 kg 45-65 m (150-210 ft) $190-230
ORBIT-III 80%, black galvanized rim 1, 1.5, 1.6, 2 kg 45-74 m (150-242 ft) $220-330
ORBIT-IV 84%+, black galvanized rim 1, 1.5, 1.6, 2 kg 55-76 m (180-249+ ft) $300-350
FSPRO II Black 82%, black anodized aluminum 1, 1.6, 2 kg 45-65 m (170-210 ft) $499-699
FSPRO I Silver 83% (1.6 kg), 86.5% (2 kg), platinum plated 1, 1.6, 2 kg 58-76 m (190-250 ft) $580-1,195

Prices vary by weight. Every ORBIT model includes a free carry bag, and the FSPRO II Black comes with a free crossover bag. Discus ship free.

Which One Should You Buy?

  • New to the discus, or need a warm-up disc? Start with the ORBIT. It’s a forgiving 73% student disc with a steel rim.
  • High school or college thrower building consistency? The ORBIT-I is a low-spin competition disc you’ll use for years, and it comes in every weight from 1 kg to 2 kg.
  • Release getting clean and distances climbing? Step up to the ORBIT-II or ORBIT-III for more carry.
  • Advanced thrower with real release speed? The ORBIT-IV gives you high rim weight for distance.
  • Competing at an elite level? The FSPRO discs are FiberSport’s professional competition line, with the FSPRO I Silver carrying the highest rim weight we list.

Not sure where you fit? Pick the lower rim weight. A disc you can control will out-throw one you can’t.

FAQ

How do I choose a discus?

Start with the weight your rules require, then pick a rim weight that matches your release: low for beginners and anyone fighting wobble, higher for throwers with a fast, clean release. Then choose the material and a disc that fits your budget.

What rim weight discus should I use?

Beginners and developing throwers usually do best with a low rim weight (around 70-75%). Throwers with a consistent, fast release can move to 78-80% and then above 80%. See High Spin vs Low Spin Discus for how to tell.

Where can I buy a discus?

You can buy FiberSport ORBIT and Pro discus online here: shop discus. Teams and schools can request a quote on the team orders page.

Is a carbon fiber discus better?

Carbon plates are one way to push weight out to the rim, which raises rim weight. But rim weight only helps if your release can use it. For most throwers, the right rim weight matters more than the plate material.

What is the best discus for a beginner?

A low rim weight disc in your competition weight, like the FiberSport ORBIT or ORBIT-I. They’re forgiving and help you learn a clean release.

Shop FiberSport ORBIT discus

Shop discus →

Know your rim weight?

Browse the full ORBIT discus range.

Shop discus

Not sure? Talk to a reseller

Pole consult with a FiberSport authorized reseller.

Find a reseller

Buying for a team?

Quotes, POs and W-9.

Get a team quote